1. Home
  2. Wed Effect Of Granulated Slag As Sand Replacement In Concrete

Wed Effect Of Granulated Slag As Sand Replacement In Concrete

  • Effect Of Granulated Slag As Sand Replacement In Concrete

    Effect Of Using Granulated Steel Slag In. Manufactured sand.But in this paper only the effect of using granulated steel slag in concrete mixes as an fine agate on compressive strength and workability is discussed.The properties of steel slag are also verified with the addition of ggbs ground granulated blast furnace slag as a replacement for cement.

  • Application Of Granulated Leadzinc Slag In Concrete As An

    Feb 01 2013 Granulated slag is substituted for raw sand partly or totally. Ratios of 25 50 75 and 100 by weight of sand are used. The effects of granulated leadzinc slag GLZS as sand replacement material on the compressive strength and gamma radiation attenuation properties of concrete are investigated and analyzed.

  • Effects Of Ground Granulated Blast Furnace Slag In

    grade 120 slag cement concrete strength equaled or surpassed that of OPC concrete. Compared to OPC concrete the time to reach 3000psi traffic opening strength was delayed by 1 to 2 days for 30 replacement and by 3 to 4 days for 50 replacement. Deicer scaling resistance decreased as the level of slag cement replacement increased.

  • The Exploitation Of Blast Furnace Slag As Sand Replacement

    Apr 22 2017 The results of compressive and flexural strength showed improvement by the use of ground granulated blast furnace slag as a replacement of sand in concrete mixtures. The optimum percentage is between 30 and 40 after those percentages there is no observed increase.

  • Effect Of Granulated Blast Furnace Slag As

    In this paper granulated blast furnace slag is used as substitute for river sand in cement mortar and concrete to overcome the environmental problems created due to over mining. In this investigation in a cement mortar and concrete replacing natural sand by granulated blast furnace slag in a range of 20 40 6080 and 100.

  • Application Of Granulated Leadzinc Slag In Concrete As An

    Granulated slag is substituted for raw sand partly or totally. Ratios of 25 50 75 and 100 by weight of sand are used. The effects of granulated lead-zinc slag GLZS as sand replacement material on the compressive strength and gamma radiation attenuation properties of concrete are investigated and analyzed.

  • Effects Of Ggbs In Concreteslag Processing Plant

    Effect Of Granulated Slag As Sand Replacement In Concreteeffect of 30 ground granulated blastthis paper investigates the effects of using ground concrete slag sand ground granulated blast-furnace slag strength studies. the replacement percentages of cement with ggbs are 20 40 and 60 by weight previouslimestone crushingamp processing plant layout.Ground Granulated Blast Furnace Slag

  • A Study On Properties Of Concrete Made With Processed

    In this study an attempt has been made to use granulated blast furnace slag from a local steel plant as a substitute to natural sand in normal concrete. The study mainly focusses on understanding the influence of different replacement ratios and suitability of slag replacement ratios higher than 50 in normal concrete.

  • What Are The Materials For Replacement Of Sand In Concrete

    4. Granulated Blast Furnace Slag. Granulated blast furnace slag is a waste of steel industry its use can be best exploited as part replacement of sand in concrete. It can replace sand to the amount of 70 in concrete mixes. Its Availability is limited restricted to steel plant area. As Granulated blast furnace slag has high glass content .

  • An Experimental Investigation On Properties Of Concrete By

    Ground Granulated Blast Furnace Slag is a by-product of Iron and Steel industry which is produced in large quantities as a solid waste. It is highly cementitious Quarry Dust is used as a replacement of Natural Sand due to its scarcity. The replacement percentages of Cement with GGBS are 20 40 and 60 by weight and 25 50 75 and 100 of Quarry Dust are used as a replacement of

  • Use Of Blast Furnace Slag Sand In Concrete As A Partial

    high performance concrete with ggbs and robo sand International . Ground Granulated Blastfurnace Slag GGBS and sand with the ROBO sand work on replacing the cement with fly ash and blast furnace slag without affecting the strength. River sand Fine aggregate which is one of the constituents used in the performance concrete with partial replacement of cement by GGBS.

  • High Performance Concrete With Ggbs And

    Ground Granulated Blastfurnace Slag GGBS and sand with the ROBO sand crusher dust. The cubes and cylinders are tested for both compressive and tensile strengths. It is found that by the partial replacement of cement with GGBS and sand with ROBO sand helped in improving the strength of the concrete substantially compared to normal mix concrete. Keywords High Performance Concrete

  • Literature Review Of A Granulated Blast Furnace Slag As A

    Literature review of a granulated blast furnace slag as a replacement of sand Products. As a leading global manufacturer of crushing grinding and mining equipments we offer advanced reasonable solutions for any size-reduction requirements including Literature review of a granulated blast furnace slag as a replacement of sand quarry aggregate and different kinds of minerals.

  • A Study On Partial And Full Replacement Of Fine Aggregate

    Nov 01 2020 The influence of the partial full replacement of fine aggregates with granulated blast furnace slag GBS and its effect on mechanical strength and durability properties acid attack of high-performance concrete of grade M60 had been studied in the present work.

  • Mechanical And Durability Properties Of Slag

    replacement level had significant effects on the strength and durability characteristics 6. The strength of the concrete at the early age reduces when the slag replacement is more than 50. However at a later age the strength improvement was noticed in the concrete with the

  • Reactivity Effect Of Calcium Carbonate On The Formation

    Jun 07 2021 that the use of 5 crushed oyster shells as a sand replacement improved the compressive strength of mortar by about 5 compared to that of reference mortar. However a decrease in compressive strength was noticed beyond this replacement level. Zhong et al. 36 found that the use of 5 GOS as a cement replacement exhibited an enhancement in compressive

  • Utilizing Waste Recycled Glass As Sandcement Replacement

    Dec 12 2009 Therefore cracks were observed when RGS was used as sand replacement in concrete without any precautions to minimize this risk. Different materials were used as ASR suppressors to mitigate the potential risk of ASR such as ground granulated blastfurnace slag metakaolin PGP and lithium nitrate LiNO 3. The expansion associated with ASR .

  • Effect Of Granulated Blast Furnace Slag As

    In this paper granulated blast furnace slag is used as substitute for river sand in cement mortar and concrete to overcome the environmental problems created due to over mining. In this investigation in a cement mortar and concrete replacing natural sand by granulated blast furnace slag in a range of 20 40 6080 and 100.

  • Slag Cement Benefits And Use In Concrete Slag Cement

    The use of slag cement has demonstrated long-term performance enhancements allowing designers to reduce the environmental footprint of concrete while ensuring improved performance and increased durability. The benefits of using slag cement include Improved

  • Paper Open Access Effect Of Nickel Slag As A Sand

    Mar 15 2020 The water-to-cement ratio used in this research was 0.35. Nickel slag was used as sand replacement a with the proportions of 0 10 20 30 40 and 50 by weight. Due to the different specific gravity between sand and nickel slag in which nickel slag is heavier than sand the total volume of concrete containing nickel slag will decrease.